Enterprise Class Swicthes and Wireless Access Points

www.pakedge.com
image
image

Pakedge Device & Software was created to meet the demand for high performance home networking products. Before our company was founded, computer networking products for the home were too compromised, unreliable and lacking in the "right" features. Pakedge Device & Software delivers the ultimate wireless and networking products for the uncompromising home owner. Our products speak for themselves.

  • Model
  • Description

WIRELESS ACCESS POINTS

    • WAP-C3 image

    • Enterprise class Ceiling/Wall Access Point

      The WAP-C3 represents a new standard in wireless power. With a power rating of up to 28dBm, and a dual band spectrum that supports 802.11a & 802.11b/g, the Pakedge WAP-C3 is the most powerful wireless access point on the market. The WAP-C3 takes you farther than ever before without losing data-throughput capabilities while opening up the clear skies on the less-crowded 5.0GHz spectrum. Plus, stronger connectivity with touch panels and seamless roaming in multiple-access point homes makes the WAP-C3 the best option for custom installers.

      Engineered with simplicity in mind, the WAP-C3 installs smoothly with out-of-the-box performance. Just a single Cat5e cable supplies the WAP-C3 with both Internet and power. The WAP-C3 doesn't need an electrical outlet nearby so it can be installed virtually anywhere in the home.

      The WAP-C3 offers feature-rich capabilities that ensure ease-of-use and adaptability. Touch panel users love the WAP-C3's XTP touch panel mode, a new proprietary RX/TX feature from Pakedge.

      The WAP-C3 combines a resilient steel and aluminum double housing to give the WAP-C3 long lasting toughness and reliability. All of this can be found behind the WAP-C3's smooth, attractive cover. Designed for both highly visible living areas as well as demanding interior environments, the WAP-C3, mounted unobtrusively in the ceiling or wall, performs beautifully and reliably in any room in the house. 

      Key Benefits:

      • Band 802.11a and 802.11b/g offers both 2.4GHz spectrum and the less-crowded 5.0GHz spectrum for lower interference. The WAP-C3 supports all FCC allowable channels on the 5.0 GHz spectrum including DFS, Dynamic Frequency Selection.
      • Power rating of up to 28dBm, the highest rating on the market. Web-based adjustable power output to personalize and secure your network.
      • Pakedge XTP touch panel mode for maximum touch panel connectivity
      • Supports latest security features such as WPA, WEP, RADIUS, MAC filtering, and Layer 2 Isolation
      • Powered by a single Cat5e cable due to PoE technology. Using PoE eliminates the need for a separate power cable as well as an electrical outlet near the access point, resulting in a simplified, lower cost installation.
      • Fully compatible with IEEE 802.3af standards and can be used with most PoE devices on the market.
      • Wireless Bridge mode and WDS mode allow WAP-C3 to connect two separate access points in a wireless network in order to extend the network to detached structures such as a pool house
      • Shielded aluminum housing design maximizes cooling and decreases interference.
      • Preconstruction/ attic install bracket and ceiling mount provide quick installation process and upgradeability as new wireless standards evolve
      • Paintable antenna cover to blend into any ceiling or wall

      Dimension: Antenna Housing- 7.9" x 7.9" x 0.75", Electronic Housing- 6.22" x 6.22" x 2.30", Ceiling Mount Bracket- 6.62" x 6.62" x 2.89", LxWxD

    TOP
    • WAP-W3-01 image

    • Enterprise class Ultra High Power Wall Mount wireless access point

      Continuing the Pakedge tradition of consistent RF output and long-term reliability, the Pakedge WAP-W3 is an Enterprise-Class, ultra high power wireless access point that is wall-mountable or can be set on a flat surface. The WAP-W3 features adjustable power output/range. We optimized the WAP-W3 for use with touch panels and other control devices without sacrificing data throughput.

      •Dual 802.11b/g and 802.11a radio configuration with high data speed - 54 Mbps.
      •Industry-leading, software-controlled, variable power output (28dBm) for maximum performance, range, and security.
      •Supports latest security standards such as WPA, WPA2, AES, TKIP, WEP, RADIUS, MAC Filtering, and SSID Hide.
      •Remote management, remote update, and file configuration upload capability.
      •Power-over-Ethernet - fully compatible with IEEE 802.3af. Accepts PoE power from any 802.3af switch or power supply. Overload and short circuit protection shuts down power immediately when short circuit is detected with no harm to PoE system.
      •Rugged aluminum housing designed for maximum protection from interference and efficient cooling.
      •WDS (AP to AP) Repeater and Bridging (Point-to-Point and Point-to-Multipoint) - operating modes extend range to detached structures, such as pool houses, without additional cables.
      •Supports all 802.11a channels currently allowed by FCC and features Dynamic Frequency Selection (DFS).

      Dimensions: 6.4" x 4.2" x 1.4" L x W x D

    TOP
    • WAP-O3-Panel image

    • Enterprise class Outdoor wireless access point - 18dBi

      The WAP-O3 is designed to extend your home network to outdoor areas such as your back yard, pool area, or even a boat docked outside your home. It also works great as a wireless bridge between your main network and any additional networks in adjacent buildings such as pool or guest houses. The rugged WAP-O3 housing is heat finned, diecast aluminum made to withstand harsh weather conditions.

      •Dual band 802.11a and 802.11b/g offers both 2.4GHz spectrum and the less-crowded 5.0GHz spectrum for lower interference. The WAP-O3 supports all FCC allowable channels on the 5.0 GHz spectrum including DFS, Dynamic Frequency Selection.
      •Power rating of up to 28dBm, the highest rating on the market. Web-based adjustable power output to personalize and secure your network.
      •Pakedge XTP touch panel mode for maximum touch panel connectivity
      •Supports latest security features such as WPA, WEP, RADIUS, MAC filtering, and Layer 2 Isolation
      •Powered by a single Cat5e cable due to PoE technology. Using PoE eliminates the need for a separate power cable as well as an electrical outlet near the access point, resulting in a simplified, lower cost installation.
      •Fully compatible with IEEE 802.3af standards and can be used with most PoE devices on the market.
      •Wireless Bridge mode and WDS mode allow the WAP-O3 to connect two separate access points in a wireless network in order to extend the network to detached structures such as pool houses or guest houses.
      •Rugged, diecast aluminum housing protect the WAP-O3 from nasty weather while decreasing RF interference.
      •Pole and wall mounting equipment provide for ease of installation.

      Dimensions: 11" x 9.5" x 2.5" L x W x D

    TOP
    • WAP-O3-Omni image

    • Enterprise class Outdoor wireless access point - 28dBi

      The WAP-O3 is designed to extend your home network to outdoor areas such as your back yard, pool area, or even a boat docked outside your home. It also works great as a wireless bridge between your main network and any additional networks in adjacent buildings such as pool or guest houses. The rugged WAP-O3 housing is heat finned, diecast aluminum made to withstand harsh weather conditions.

      •Dual band 802.11a and 802.11b/g offers both 2.4GHz spectrum and the less-crowded 5.0GHz spectrum for lower interference. The WAP-O3 supports all FCC allowable channels on the 5.0 GHz spectrum including DFS, Dynamic Frequency Selection.
      •Power rating of up to 28dBm, the highest rating on the market. Web-based adjustable power output to personalize and secure your network.
      •Pakedge XTP touch panel mode for maximum touch panel connectivity
      •Supports latest security features such as WPA, WEP, RADIUS, MAC filtering, and Layer 2 Isolation
      •Powered by a single Cat5e cable due to PoE technology. Using PoE eliminates the need for a separate power cable as well as an electrical outlet near the access point, resulting in a simplified, lower cost installation.
      •Fully compatible with IEEE 802.3af standards and can be used with most PoE devices on the market.
      •Wireless Bridge mode and WDS mode allow the WAP-O3 to connect two separate access points in a wireless network in order to extend the network to detached structures such as pool houses or guest houses.
      •Rugged, diecast aluminum housing protect the WAP-O3 from nasty weather while decreasing RF interference.
      •Pole and wall mounting equipment provide for ease of installation.

      Dimensions: 11" x 9.5" x 2.5" L x W x D

    TOP

SWITCHES

    • SW16-8PB-01 image

    • 16 Port Fast Ethernet Switch with 8 PoE Ports

      Our Enterprise-Class and rack mountable Fast Ethernet PoE switch is designed so all cables install from the back. This type of installation provides a clean finished rack appearance, which custom installers and their clients prefer. Also, the SW16-8PB's quiet fan design provides quiet operation next to AV equipment.

      Ethernet Features
      •Conforms to IEEE 802.3 10BASE-T, IEEE802.3u, 100BASE-TX and IEEE 802.3x flow control standards
      •Supports 10/100Mbps auto-detect half/full duplex
      •Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
      •Supports 802.3x flow control pause packet for full duplex
      •LEDs to indicate: Link/Act, Speed, Power Status and PoE activity

      POE Features
      •Supports Power over Ethernet (PoE) on each PoE-TP port (End-Point)
      •Full power(15.4w) support for per PoE-TP port
      •Supports IEEE 802.3af compliant
      •Auto detect powered device and consumption levels
      •Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority(X)
      •Automatic Fault Detection(Over/Under Voltage & Current)
      •Thermal shutdown protection (Tj > 150 degrees C)
      •LED indicators for POE activity


      Dimension: 10.375w x 7.25d x 1. 75h inches

    TOP
    • SW8-GBM-01 image

    • 8 Port Gigabit Managed Ethernet Switch

      The SW8-GBM is an 8 port, Web Managed, Layer 2, Gigabit switch for networking savvy dealers who design their own IP-based networks or dealers who want a simple, high bandwidth 8 port gigabit Ethernet switch. With this switch, you can create custom IP-based networks for fast transfer of files that demand high bandwidth and get a real efficiency improvement with the user-friendly, Web-based management interface.

      •8 fixed 10/100/1000Mbps Gigabit Ethernet ports
      •One SFP port for optional fiber connection
      •Provides 8K MAC address entries and 8 groups VLAN table
      •Port Mirror
      •Supports up to 7 ports and 4 groups port aggregation
      •Supports QoS for better communication quality
      •Supports full duplex flow control and half duplex back pressure
      •Store-and-forward forwarding scheme
      •Error packet filtering
      •Supports Jumbo frame 9K bytes
      •Web-based management interface
      •FCC Class A, CE, VCCI. Meet RoHS 

    TOP
    • SW8-GBP-01 image

    • 8 Port Gigabit Audio Video Priority Switch

      The SW8-GBP is a simple-to-use, plug-and-play switch designed to ensure high bandwidth. Demanding applications such as video and audio streaming over IP LANs are given priority ‘by port’ within the internal network helping to achieve a smooth, uninterrupted, jitter-free audio/ video experience. Also, the SW8-GBP can give priority to traffic going out to the internet cloud from the internal network. It is designed to be used with other Pakedge plug-and-play switches to create the most robust IP network for both computers and audio/video devices. No configuration, just plug and play.

      •8 fixed 10/100/1000Mbps Gigabit Ethernet ports
      •One SFP port for optional fiber connection
      •Supports "By Port" QoS for better communication quality
      •Store-and-forward forwarding scheme
      •Error packet filtering
      •FCC Class A, CE, VCCI. Meets RoHS

    TOP
    • SW8-4PB-01 image

    • Port Fast Ethernet Switch with 4 PoE Ports

      Our enterprise class and rack mountable Fast Ethernet PoE switch is designed so all cables install from the back. This type of installation provides a clean finished rack appearance, which custom installers and their clients prefer. Also, the SW8-4PB’s fanless design provides quiet operation next to AV equipment. In addition to its appearance, the SW8-4PB allows power to be supplied to any 802.3af compliant device, such as wireless access points, cameras and VoIP phones. The SW8-4PB is an advanced IEEE 802.3af compliant device with Endspan Intelligent Detection. The switch does not turn on power until it detects a valid PoE signature from the devices attached downstream on the Ethernet Cable.

      Dimension: 10.375w x 7.25d x 1.75h inches

    TOP
    • SW24-GB-01 image

    • 24 Port Gigabit Ethernet Switch

      Our Enterprise Class rack mountable Gigabit Ethernet switch is designed so all cables install from the back. This type of installation provides a clean finished rack appearance, which custom installers and their clients prefer. Also, the SW24-GB has a quiet fan design that provides silent operation next to AV equipment. The SW24-GB provides 24- 10/100/1000 Mbps Gigabit ports. The store-and-forward architecture filters errors and forwards packets in a non-blocking environment. Flow control ensures the correct data is transmitted, and 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes.

      •Complies with IEEE802.3- 10BASE-T specifications
      •Complies with IEEE802.3u- 100BASE-TX specifications
      •Complies with IEEE802.3ab- 1000BASE-T specifications
      •24- 10/100/1000Mbps RJ-45 Nway ports
      •Supports NWay protocol for speed (10/100/1000 Mbps) and duplex mode (Half/Full) auto-detection
      •Supports MDI/MDI-X auto crossover
      •Supports full and half duplex operation on all ports
      •Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
      •Wire-speed packet filtering and forwarding rate
      •Store-and-forward architecture filters fragment & CRC error packets
      •Supports 8K MAC address entries in whole system
      •500 KBytes buffer memory
      •Supports 9K bytes Jumbo Frames
      •LED indicators for network diagnostics
      •Internal power adapter
      •FCC, VCCI, CE Class A, Meet RoHS

    TOP

Router Kits

    • RSB Kit image

    • Audio-Video Bridging Network Kit

      The popularity and affordability of IP networking has driven audio/video and controls networks to share the same physical wire with computer networks. However, unlike computer data that can tolerate a certain degree of unpredictable latency, video streaming, audio streaming, and control systems cannot. These sophisticated networks require the same robustness as an enterprise network to ensure the packets that carry audio and video arrive in time and that IP-based controls do not lose critical command packets.

      The Pakedge Audio-Video Bridging (AVB) line of products is designed to solve these issues with minimum configuration. The Pakedge solution pre-configures the Security Appliance (Router) and switch, dividing the network into 4 separate subnets (VLANS) to manage traffic, broadcast, and priority for all devices based on color coded ports. The simplicity of Pakedge’s solution allows custom installers to focus on quick, quality installations without enterprise configuration 

      Key Benefits:

      • Preconfigured Enterprise-Class VLAN "out-of-the-box" solution at a fraction of the cost.
      • Color Coded Ports for AV devices, Controls and Computers for simple fast installations.
      • Integrated Pakedge Quality-of-Service, QoS to ensure jitter-free audio video streaming.
      • Stackable with additional Pakedge switches for the largest of systems.
      • AV Rack mountable- Clean Face, Fanless and cables from the back.
      • Flexible with unlimited customizations with an Advanced Setting login (additional support offered by Fortinet if needed).
      • Internet Gateway Security with annual Antivirus/Antispam and Intrusion Prevention Service (IPS) subscriptions.

      Dimension: Rack mount Bracket - 19" x 8" x 1.75" L x W x H

    TOP
    • RB Kit image

    • Router Kit

       

      The Pakedge/FortiGate appliance offers complete security and high performance routing for converging computer and IP-Based Audio Video networks. A very robust operating system offers a full suite of security services in one hardened platform: antivirus/antispyware/antimalware, intrusion prevention (IPS), web filtering, stateful firewall and traffic shaping, and IPSec/SSL VPN. This combination offers superior protection against threats such as IM/P2P traffic, phishing and pharming, and sophisticated blended threats.

      Pakedge preconfigured overlay and Pakedge Support make the Fortinet appliance simple to install for the AV custom installer. The simplicity of Pakedge’s solution allows custom installers to focus on quick, quality installations without enterprise configuration complexities.

      Key Benefits:

      • Enterprise-Class multi-threat protection security/router appliance that is robust, reliable, and versatile, offers high performance, and is based on Application Specific Integrated Circuit (ASIC) design.
      • Pakedge preconfigured for the advanced Residential installation for simple, quick installations without enterprise configuration complexities.
      • Predefined Basic and Advanced Settings with Pakedge support. Additional unlimited customizations available with support offered by Fortinet, if needed.
      • AV Rack mountable- Clean Face, Fanless and cables from the back.
      • Dual WAN links for redundant Internet connections deliver higher availability. Will switch over to the other connection when one connection fails..
      • Internet Gateway Security with annual Antivirus/Antispam and Intrusion Prevention Service (IPS) subscriptions.
      • Up to 20 VPN tunnels.

       

      Dimension: Rack mount Bracket - 19" x 8" x 1.75" L x W x H

    TOP