IP-Based Multi-Room Audio, Video and Control Systems

www.netstreams.com
image
image

NetStreams is the global leader in digital media networks based on Internet protocol (IP) technology.  NetStreams IP-Based and IP-Controlled systems, designed for commercial use, handle virtually any number of digital or analog sources and deliver uncompressed content, including high definition audio and video, to virtually an unlimited number of zones.  Most importantly, any zones playing the same source will be perfectly synchronized, to less than 1 millisecond.  By combining content and control signals in one data stream,  NetStreams systems offer new levels of simplicity, reliability, and expandability, benefiting both integrators and end users with lower costs for installation, set-up and support.

  • Model
  • Description

DIGILINX IP-BASED MULTI-ROOM AUDIO

    • NS-SL9250-CS image

    • Commercial SpeakerLinX Room Controller

      The SpeakerLinX is the heart of a zone.  Each SpeakerLinX provides amplification, zone control, and supports locally connected sources.  When used as part of a DigiLinX multi-zone audio, video, and control system, the SpeakerLinX allows virtually unlimited number of zones, system-wide synchronization, and digitally perfect audio distribution.

      •Decentralized Network   
      •Unlimited Zones    
      •Enhanced Audio Quality     
      •Mounting Options    
      •NetStreams EIM Interface•StreamNet™ Connected
      • IP based
      •2 x 50 watt digital amplifier
      •Balanced audio and line out
      •Built-in web server

       Dimensions: (W x H x D) 9 1/2" x1 3/4" x 8 2/3" (244mm x 45mm x 220mm)
       

    TOP
    • NS-MLA9101-CS image

    • Commercial MediaLinX - Legacy Source Network Interface / Audio

      MediaLinX provides the gateway for audio to flow into the DigiLinX network.  Newer native IP Based sources can output the audio directly onto the network through the Ethernet connection.  Older legacy sources that output the audio over a line level connection need a device to convert the audio to an IP stream.  For each legacy source the MediaLinX encodes and prepares the audio for distribution across the DigiLinX network. In addition to encoding, MediaLinX also provides a mechanism for one-way and two-way control, gathering metadata and power management of the source. Using MediaLinX greatly simplifies the installation and reduces the amount of hardware typically required of large multi-zone systems.

      •Decentralized Architecture   
      •Unlimited Sources    
      •Versatile Audio Encoder with multiple •Audio Input Options
      •Integrated IR Receiver for IR Learning    
      •Superior Source Control
      •Mounting Options    
      •StreamNet™ Connected

      Dimensions: (W x H x D) 9 1/2" x 1 3/4" x 8 2/3" (244 mm x 45 mm x 220 mm)

    TOP
    • NS-CL9100-CS image

    • Commercial ControLinX - RS232 / IR Network Interface

      DigiLinX connects to other sub-systems, providing a means of not only controlling audio from the touchscreen, but also controlling lighting, HVAC, security and other subsystems.  ControLinX provides the processor and the interface to these systems using IR, RS-232, or IP.  By connecting to other systems and controlling them from one user interface, the project maintains a consistent look and feel.

      •Multi-Protocol Interface   
      •Third Party Drivers   
      •Common Interface
      •Mounting Options
      •Included Drivers   
      •StreamNet™ Connected

      Dimensions:  (W x H x D) 9 1/2” x 1 3/4” x 8 2/3” (244mm x 45mm x 220mm)

    TOP
    • NS-XT9170-CS image

    • Constant Voltage Transformer

      NetStreams Constant Voltage Transformer converts an 8 Ohm audio signal into a 70 or 100 volts.  When paired with a SpeakerLinX Professional Amplifier or other amplifier, the XT9170-CS will allow DigiLinX to use 70 or 100 volt speakers in commercial audio applications.

      •Supports 70 Volt or 100 Volt Speakers   
      •Rack Mountable   
      •Works Standalone

    TOP

DIGILINX IP-BASED MULTI-ROOM VIDEO

    • NS-MLAV9300-AV image

    • Commercial MediaLinX AV - Multimedia Source Network Interface /

      MediaLinX A/V provides the gateway for audio and SD/HD quality video to flow into the DigiLinX network.  For each source a MediaLinX A/V encodes and prepares the audio and video for distribution across the TCP/IP network.  The MediaLinX A/V also provides a mechanism for one-way and two-way control of the source and can ensure that the source stays powered on.  Using a MediaLinX A/V greatly simplifies the installation and reduces the amount of hardware typically required of large multi-zone systems.

      •Decentralized Network   
      •Unlimited Audio/Video Sources    
      •Versatile Audio Encoder     
      •HD/SD Video Encoder
      •Mounting Options    
      •StreamNet™ Connected

      Dimensions: (W x H x D) 9 1/2" x 1 3/4" x 8 2/3"  (244mm x 45mm x 220mm)

    TOP
    • NS-VL9100-CS image

    • Commercial ViewLinx - IP-Based Audio Video Decoder:

      ViewLinX greatly simplifies the design and installation of large multi-zone audio/video distribution systems.  HD and SD quality multimedia can be distributed to virtually unlimited number of displays by placing a ViewLinX at each display,  There is also no need to include separate components for controlling the display, its all included in the ViewLinX.  The DigiLinX system also contains control for sources and displays and transports audio, video and control over one CAT5 with TCP/IP, meaning there is no need to wire a separate, expensive parallel infrastucture for control.

      •Decentralized Network   
      •Compressed or Uncompressed Video   
      •Unlimited displays
      •SD/HD Video Decoder
      •ViewLinX DualDrive
      •Audio Decoder
      •Additional Features    
      •Mounting Options    
      •StreamNet™ Connected

      Dimensions: (W x H x D)   9 1/2" x 1 3/4" x 8 2/3"  (244mm x 45mm x 220mm)

    TOP